Télémécanique Preventa XUSLBR5A0320 Safety light curtain typ

---

---

New never installed but without original packaging and missing the CD-ROM. This model is now discontinued, MSRP 1600 €.

Télémécanique Preventa XUSLBR5A0320.
range of product

Preventa Safety detection

series name

Basic

product or component type

Safety light curtain type 4

device short name

XUSLB

output type

1 auxiliary output solid-state PNP
2 safety outputs OSSD solid-state PNP (NO) (short-circuit protection)

product specific application

For hand protection

minimum object diameter for detection

30 mm

[Sn] nominal sensing distance

8 m with Programming and Diagnostic Module (PDM)
0.3...20 m

height protected

320 mm

number of beams

16

Complementarydetection system

Transmitter-receiver system

response time

23 ms

kit composition

1 arc suppressor set(s)
1 receiver(s)
1 transmitter(s)
1 test rod(s)
2 sets of 2 brackets with fixings

[EAA] effective aperture angle

2.5 ° at 3 m

light source

GaAIAs LED, 880 nm

[Us] rated supply voltage

24 V DC (+/- 20 %)

[Ie] rated operational current

2 A

current consumption

285 mA (transmitter)
450 mA no-load (receiver)
1.8 A with maximum load (receiver)

output current limits

625 mA for safety outputs OSSD
100 mA for auxiliary output

output voltage

24 V

output circuit type

DC

switching capacity in mA

50 mA

local signalling

1 LED (transmitter), function: power supply
4 LEDs (receiver), function: stop, run, interlock, ECS/B Blanking or FB (Floating Blanking)

electrical connection

1 female connector M12 5 pins (transmitter)
1 female connector M12 8 pins (receiver)

function available

Alignment aid by display of each light beam broken accessible by cabling alone
Auto/manual accessible via programming and diagnostic module
Automatic start accessible by cabling alone
Auxiliary output (PNP, status signalling) accessible by cabling alone
Display of operating modes and faults by LED and/or PDM accessible via programming and diagnostic module
LED display of operating modes and faults accessible by cabling alone
Light beam coding (A or B) accessible via programming and diagnostic module
Monitoring of external switching devices (EDM: External Device Monitoring) accessible via programming and diagnostic module
Programming+downloading of conf settings, via programming+diagnostic module(PDM) accessible via programming and diagnostic module
Sensing distance (short, long) accessible via programming and diagnostic module
Test (MTS: Monitoring Test Signal) accessible by cabling alone

marking

CE

material

Casing : aluminium
End caps : 20 % fibre glass impregnated nylon

fixing mode

End brackets

product weight

1.97 kg

Environmentstandards

OSHA 1910-217C
Machinery directive 2006/42/EC
EMC 2004/108/EC
Work equipment directive 2009/104/EC
EN/IEC 61496-2
OSHA 1910-212
EN/IEC 61496-1-2 for type 4 ESPE
ANSI/RIA R15.06
EN/IEC 61496-1
ANSI B11:19-1990
ROHS directive 2002/95/EC

product certifications

TÜV
CSA
UL

safety level

Type 4 conforming to IEC 61496-1-2
Can reach SIL 3 conforming to IEC 61508 (correctly wired)
Can reach category 4 conforming to EN/ISO 13849-1 (correctly wired)
Can reach PL = e conforming to EN/ISO 13849-1 (correctly wired)

safety reliability data

PFH = 4.9E-8 1/h conforming to IEC 61508 (verified in worst case conf: 256 beams, 2 segments, mute), proof test interval = 20 yr

ambient air temperature for operation

-10...55 °C

ambient air temperature for storage

-25...75 °C

relative humidity

0...95 % without condensation

IP degree of protection

IP65

shock resistance

10 gn for 16 ms conforming to IEC 61496-1

vibration resistance

0.35 +/- 0.05 mm (f = 10...55 Hz) conforming to IEC 61496-1.

For more information, click [view offer] to the right side.