Sensorex SX20MER200 DC/DC LVDTs 20mm Diameter 200mm stroke

30 €

Logo

Report this ad


Postcode:
59140
City:
Dunkerque

Sensorex SX20MER200 DC/DC LVDTs 20mm Diameter 200mm stroke


The SX20MER200 DC/DC LVDT Sensorex is designed to be used without any external signal conditioner.


It delivers a 4/20mA and 0-10V calibrated output proportionnal to the stroke, and requires a 24VDC power supply.

Electrical stroke +-100mm

Mechanical stroke +-102.5mm

General speci fication s (at 25 °C)
Electrical stroke : ± 2.5 to ± 100 mm
Power supply : 24 VDC ± 10 VDC
Consumption (except current output) : 15 mA typical, 30 mA maxi
Calibrated current output : 4-20 mA ± 1 %
Maximum acceptable load : (Power supply V -3) / 0.02 Ohms
Voltage output : 0/10 V ± 1 %
Voltage output impedance : 500 Ohms
Linearity : ± 0.25 % FS, except stroke ± 2,5; ± 5 and ± 150 mm : ± 0.5 % FS
Output accuracy : < 0.5 % FS, except stroke ± 150 mm : < 1 % FS
Bandwidth : 375 Hz ± 10 % (second order)
Electrical noise : < 10 mV peak to peak, 3 mV rms
Zero thermal drift : < 80 ppm °C / FS
Sensitivity thermal drift : < 300 ppm °C / measure
Operating temperature : - 40 °C to + 85 °C
Shock resistance : 100 g / 11 ms
Vibration resistance : 10 g rms (20 to 2000 Hz)
Protection : IP66 or IP67 (according to models)
Electronic board protection : Tropicalization
Test reports for 4-20 mA and 0/10 V outputs are supplied.

connection

Wire color Function
Red + VDC (power supply)
Blue 0 VDC (power supply)
White Voltage output 0/10 V
Green Current output 4/20 mA
Yellow Low point

For more information, click [view offer] to the right side.