1 429,99 €
For sale is Electro-Voice CPS4.10 apmlifier with 4 channels of each nominal output is 1000W. MSRP: 3200 US$
Amplifier was never used (just tested before i made this listing) and it is 100% operational.
See more technical details below.
We will ship to any location worldwide. Please send us message for shipping cost to your location.
All customs fees are not included in the international shipping costs. Buyer is responsible for all customs fees.
Please contact us if you have any question regarding this item.
This four-channel CPS amplifier from Electro-Voice features groundbreaking Class-D technology for maximum amp efficiency and minimized heat dissipation in 19-inch racks.
Each channel individually provides transformerless, switchable output characteristics, which enable specific channels to achieve maximum drive. Power into 2 Ohms, 4 Ohms, 70V, or 100V line – no transformers are required. In Hi-Z operation (70V or 100V), a 50 Hz high-pass filter (HPF) provides protection against loudspeaker transformer saturation. Additionally, amplifier channels can be bridged in pairs for double output power.
Each contractor-friendly, multi-channel CPS amplifier also features Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on remote via contact closure, and rear level controls.
A module slot for the RCM-810 remote control module provides control network functionality, allowing for remote system diagnostics and control via IRIS-Net software. In addition, using the RCM-810’s Variable Load Drive feature can tailor the amplifier’s output power to match every load from 2 Ohms up to 10 Ohms in steps of 0.1 Ohms.
- Class-D design for high-efficiency and low heat dissipation
- Flexible matching for Low-Z and High-Z applications
- Optional remote control via IRS-Net
- Four-channel design in 2RU chassis
- Maximum Midband Output Power (THD=1%, 1kHZ):
4 x 1000W @ 2 ohms
4 x 1000W @ 4 ohms
4 x 1000W @ 70V
4 x 1000W @ 100V
- Rated Output Power (THD <0.3%, 20Hz-20kHz)
4 x 900W @ 2 ohms
4 x 900W @ 4 ohms
4 x 900W @ 70V
4 x 900W @ 100V
- Maximum Bridged Output Power (THD=1%, 1kHz)
2 x 2000W @ 4 ohms
2 x 2000W @ 8 ohms
2 x 2000W @ 140V
2 x 2000W @ 200V
- Maximum RMS Voltage Swing (THD=1%, 1kHz, per channel): 100V
- Power Bandwidth (THD=1% ref.1kHz, half power @ 4 ohms load): 10Hz-25kHz, 50Hz-25kHz
- Voltage Gain, ref. 1kHz: 32 dB (2ohm/4ohm mode), 33dB (70V mode), 36dB (100V mode)
- THD at rated output power (MBW=80kHz, 1kHz): <0.05%
- IMD-SMPTE, 60Hz, 7kHz: <0.5%
- DIM30, 3.15kHz, 15kHz: <0.02%
- Maximum Input Level: +21dBu
- Crosstalk, ref. 1kHz at rated output power: <80dB
- Frequency Response, ref. 1kHz: 10Hz-30kHz (+/-1dB)
- Input Impedance, active balanced: 20k ohms
- Damping Factor, 1khz, 8 ohms: >240
- Slew Rate: 28V/us
- Output Noise, A-weighted: <-66dBu
- Output Stage Topology: Class D
- Power Consumption, 1/8 max. output power @ 4 ohms: 840W
- Power Requirements: 220-240V, 50-60Hz or 120V, 50-60Hz or 100V, 50-60Hz
- Protections: Audio Limiters, Temperature, DC, HF Short Circuit, Peak Current Limiters, Inrush Current Limiters, Turn-on Delay
- Cooling: Front-to-rear, continuously variable fans
- Ambient Temperature Limits: 40 to 105 deg. F
- Safety Class: I
- Dimensions (W x H x D): 19" x 34.7" x 16.6"
- Weight: 24.6 lbs
- Optional Accessories:
2-way internal X-Over cards, 24dB, LR, XHP-5 for 500Hz/XHP-8 for 800Hz
RCM-810 IRIS-Net Control & Supervision Module
Rear-Rackmount Kit RMK-15
For more information, click [view offer] to the right side.