AJA KONA LHi Capture Card or analog and digital Standard and

299 €

Logo

Report this ad


Postcode:
94140
City:
Alfortville

AJA KONA LHi Capture Card or analog and digital Standard and High Definition workflows
AJA KONA LHi (A) - Z-OEM-LHI-R0 - T40348

In Good Condition and Working Order.
Without any accessories and drivers, without the original box.

https://www.aja.com/media/pdfs/brochures/All_Product_Brochure_WEB_EN.pdf

KONA for PC Supported System Configurations:
The AJA support and engineering team target only Enterprise Class Workstations. The slot placement is based on an engineering analysis of the motherboard for performance and available bandwidth. These are the required 4K/UltraHD/2K/HD workflow configurations for the KONA product line.

Tech Specs
Video Formats
• (2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30
• (2K) 2048 x 1080PsF 23.98, 24
• (HD) 1080i 25, 29.97, 30
• (HD) 1080PsF 23.98, 24
• (HD) 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
• (HD) 720p 50, 59.94, 60
• (SD) 625i 25
• (SD) 525i 29.97

Software Dependent Formats
• 720p 23.98
• 525i 23.98

 NOTE: These formats are dependent on specific software functionality and are not normal over the wire formats.
Video Input Digital
• 3G/SD/HD SDI, SMPTE-259/292/296/424, 8 or 10-bits
• Single Link 4:2:2 (1 x BNC)
• HDMI v1.3 30 bits/pixel, RGB or YUV, 2.25 Gbps, SD, HD, 1080p 50/60 (1 x mini-HDMI)

Video Input Analog
• Composite/S-Video (Y/C) (1 x BNC/2x BNC+Adapter)
• NTSC, NTSCJ, PAL
• Component (3 x BNC)
• HD: YPbPr, RGB
• SD: YPbPr, RGB (component mode)
• SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB
• 12-bit D/A, 8x oversampling
• +/- .2 dB to 5.0 MHz Y Frequency Response
• +/- .2 dB to 1 MHz C Frequency Response
• .5% 2T pulse response
• <1% Diff Phase
• <1% Diff Gain
• <1 ns Y/C delay inequity

Video Output Digital
• 3G/SD/HD SDI, SMPTE-259/292/296/424
• Single Link 4:2:2 or 4:4:4 (1 x BNC)
• HDMI v1.3 30 bits/pixel, RGB or YUV, 2.25 Gbps, SD, HD, 1080p 50/60 (1 x mini-HDMI)

Video Output Analog
• Composite/S-Video (Y/C) (1 x BNC/2x BNC+Adapter)
• NTSC, NTSCJ, PAL
• Component (3 x BNC)
• HD: YPbPr, RGB
• SD: YPbPr, RGB (component mode)
• SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB
• 12-bit D/A, 8x oversampling
• +/- .2 dB to 5.0 MHz Y frequency response
• +/- .2 dB to 1 MHz C frequency response
• .5% 2T pulse response
• <1% Diff Phase
• <1% Diff Gain
• <1 ns Y/C delay inequity

Audio Input Digital
• 8-Channel, 16- and 24-bit SMPTE-259 SDI embedded audio, 48 kHz sample rate, synchronous
• 8-Channel, 16- and 24-bit HDMI embedded audio, 48 kHz sample rate, synchronous
• 2-Channel, 16- and 24-bit AES/EBU audio, 48 kHz sample rate, synchronous or nonsynchronous, internal sample rate conversion (via 1 x XLR on breakout cable or optional KLHi-Box)

Audio Input Analog
• 2-Channel, 16- and 24-bit A/D analog audio, 48 kHz sample rate, balanced (via 2 x XLR on DB-25 breakout cable or optional KLHi-Box)
• +24 dBu full scale digital
• +/- 0.2 dB 20 Hz to 20 kHz frequency response

Audio Output Digital
• 8-Channel, 16- and 24-bit SMPTE-259 SDI embedded audio, 48 kHz sample rate, synchronous
• 8-Channel, 16- and 24-bit HDMI embedded audio, 48 kHz sample rate, synchronous
• 2-Channel, 16- and 24-bit AES/EBU audio, 48 kHz sample rate, synchronous or nonsynchronous, internal sample rate conversion (via 1 x XLR on breakout cable or optional KLHi-Box)

Audio Output Analog
• 2-Channel, 16- and 24-bit D/A analog audio, 48 kHz sample rate, balanced (via 2 x XLR on DB-25 breakout cable or optional KLHi-Box)
• +24 dBu full scale digital (0 dbFS)
• +/- 0.2 dB 20 Hz to 20 kHz frequency response
• 2-Channel unbalanced output (via 2 x RCA jacks on optional KLHi-Box)

Up-Conversion
• Hardware 10-bit
• Anamorphic: fullscreen
• Pillarbox 4:3: results in a 4:3 image in center of screen with black sidebars
• Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars
• Zoom Letterbox: results in image zoomed to fill fullscreen
• Zoom Wide: results in a combination of zoom and h

For more information, click [view offer] to the right side.